manualshive.com logo in svg

VTech VSP605, Быстрый старт, Страница: 10 / 12

Поделиться
Скачать
VTech VSP605 Скачать руководство пользователя страница 10

10

Troubleshooting

Problem

Solutions

The LED on the Range 

Extender won’t stop 

flashing.

• Move the Range Extender closer to the Base Station.
• Check for interference from electronic devices.
• Make sure the Range Extender is not too close to 

metal objects or thick walls.

Calls will not hand over to 

the Range Extender.

• Make sure the Range Extender is within the Base 

Station’s good signal range.

• Make sure there are at least 11 meters between 

Range Extenders.

I used to be able to connect 

to the Base Station, but now 

I cannot.

• Make sure the Range Extender is powered on.
• Move the Range Extender closer to the Base Station 

and register it again.

The audio quality is 

very poor or noisy when 

receiving a call.

The signal connection is very poor. Try to find another 

location where the signal to the Base Station is better.

Calls lost or audio becomes 

poor when moving from 

the Base Station reception 

range to the Range 

Extender reception range.

You may be moving out of the Base Station or Range 

Extender reception range, or are in a blind spot. Move 

towards the Base Station or Range Extender.

Содержание VSP605













Отзывы:

Нет отзывов