VTech VSP600A, Руководство администратора и поставки

Страница: 30 / 123

Using the WebUI 30
Back to Contents
VSP600A Administrator and Provisioning Manual
Authentication name If authentication is enabled on the server, enter the
authentication name (or authentication ID) for
authentication with the server.
Authentication password If authentication is enabled on the server, enter the
authentication password for authentication with the server.
Dial Plan Enter the dial plan, with dialing strings separated by a |
symbol. See
“Dial Plan” on page 31 .
Inter Digit Timeout (secs) Sets how long the VSP601A waits after any "P" (pause) in
the dial string or in the dial plan.
Maximum Number of
Calls Select the maximum number of concurrent active calls
allowed for that account.
Feature Synchronization Enables the VSP600A to synchronize with Broadworks
Application Server. Changes to features such as DND, Call
Forward All, Call Forward No Answer, and Call Forward
Busy on the server side will also update the settings on the
VSP601A menu and WebUI. Similarly, changes made
using the VSP601A or WebUI will update the settings on
the server.
DTMF method Select the default DTMF transmission method. You may
need to adjust this if call quality problems are triggering
unwanted DTMF tones or you have problems sending
DTMF tones in general.
Unregister after reboot Enables the phone to unregister the account(s) after
rebooting-before the account(s) register again as the
phone starts up. If other phones that share the same
account(s) unregister unexpectedly in tandem with the
rebooting VSP600A, disable this setting.
Setting Description