Using the WebUI
31
Back to Contents
VSP600 Administrator and Provisioning Manual
Authentication name
If authentication is enabled on the server, enter the
authentication name (or authentication ID) for
authentication with the server.
Authentication password
If authentication is enabled on the server, enter the
authentication password for authentication with the server.
Dial Plan
Enter the dial plan, with dialing strings separated by a |
symbol. See
“Dial Plan” on page 32
.
Inter Digit Timeout (secs)
Sets how long the VSP601 waits after any "P" (pause) in
the dial string or in the dial plan.
Maximum Number of
Calls
Select the maximum number of concurrent active calls
allowed for that account.
Feature Synchronization
Enables the VSP600 to synchronize with Broadworks
Application Server. Changes to features such as DND, Call
Forward All, Call Forward No Answer, and Call Forward
Busy on the server side will also update the settings on the
VSP601 menu and WebUI. Similarly, changes made using
the VSP601 or WebUI will update the settings on the
server.
DTMF method
Select the default DTMF transmission method. You may
need to adjust this if call quality problems are triggering
unwanted DTMF tones or you have problems sending
DTMF tones in general.
Unregister after reboot
Enables the phone to unregister the account(s) after
rebooting-before the account(s) register again as the
phone starts up. If other phones that share the same
account(s) unregister unexpectedly in tandem with the
rebooting VSP600, disable this setting.
Setting
Description