21
Registering the handset to the base
The handset must be registered to the base station in order to make and receive
calls.
To register the handset:
1.
Make sure the handset has a charged battery before
proceeding. Make sure the base station is connected to power.
2. Press
MENU
on the handset. The Main Menu appears.
3. Press
q
to scroll to
User settings
and press
SELECT
.
4. Press
q
to scroll to
Registration
and press
SELECT
.
5. With
Handset
highlighted, press
SELECT
. The handset
screen displays instructions. Press
NEXT
to continue
reading the instructions.
6. On the base station, press the
HANDSET LOCATOR
button
for at least four seconds, then release the button. Both LEDs
on the base station begin to flash.
7. Press the
#
key on the handset. The screen shows
Please
wait...
The process takes up to 10 seconds to complete. When
the first handset registers, it beeps and the screen displays
HANDSET 1
.
If the handset fails to register, place it in the charger again for a
few seconds, remove it and repeat the registration procedure.
BACK ENTER
User settings
Main Menu
Status
Features
Intercom
BACK ENTER
Registration
User settings
Edit VLAN ID
Edit PIN code
Key Tone
NEXT
Press and
hold HANDSET
LOCATOR key
at base for
4 seconds
LINE
MENU
11:26PM
01/01
HANDSET 1
