Handset Features
IN USE/
LOW BATT LED
PHONE /
FLASH KEY
REDIAL /
PAUSE KEY
TONE/ * KEY
PROG KEY
VOLUME CONTROL
OFF KEY
CHAN KEY
MEM KEY
IN USE/LOW BATT LED
•
The IN USE/LOW BATT LED lights when
the Handset is on an active call.
•
It flashes in cadence with an incoming
ring.
•
It flashes quickly during programming
mode.
•
It flashes slowly when battery is low.
PHONE / FLASH KEY
•
Press the PHONE key to make a call.
•
If you are currently on a call, pressing
PHONE flashes the line. This would be
used with call waiting to answer your
second call.
REDIAL / PAUSE KEY
•
When you hear the dial tone, pressing
the REDIAL key will dial out the last
number that was called on your phone.
•
It can also be used to store the last
number dialed into the speed dial
memory. See Storing a Redial
Number into Speed Dial for details.
•
You can store a PAUSE into your dialing
number. See Storing Pauses in
Memory for details.
TONE/
*
KEY
•
In PULSE dialing mode, this key is used
to switch to Temporary TONE dialing
mode.
PROG KEY
•
Press PROG key to enter programming
mode.
VOLUME CONTROL
•
Adjust the volume of what you hear
through the Handset.
•
While on a call, press the Up or Down
key to adjust the listening volume. The
Handset will emit a double beep when
the maximum or minimum volume level
has been reached.
OFF KEY
•
Press the OFF key to exit all modes of
operation.
CHAN KEY
•
Pressing the CHAN key when the
Handset is in use will activate a channel
change to the next free channel.
•
This is used if you are experiencing
noise or interference on the current
channel.
MEM KEY
•
Press the MEM key to enter memory
mode.
•
The sequence for dialing a speed dial
number in memory is: PHONE, MEM,
Number Button (0-9).
7
Getting Started
