EN - 22
Question
Suggestion
The cordless handset beeps and is not
performing normally.
• Make sure the Cat-5 network cable is
plugged into the
LAN
port of the telephone
base and the network wall jack with Power
over Ethernet (PoE).
• Check your SIP server or telephone
administrative settings. Refer to the
SIP
Phone Configuration Guide
for details.
• Disconnect the telephone base from the
network wall jack and connect a different
working SIP telephone. If the other SIP
telephone has the same problem, the
problem is in the wiring or network server.
Contact your telephone service provider
(charges may apply).
• Other electronic products such as HAM
radios and other DECT phones can cause
interference with your cordless phone.
Try installing your phone as far away as
possible from these types of electronic
devices.
There is interference during a telephone
conversation, or the call fades in and out when
I am using the cordless handset.
• The cordless handset may be out of range.
Move the handset closer to the telephone
base or adjust the setting of RF transmission
power. Refer
SIP Phone Configuration
Guide
for details.
• Other electronic products such as HAM
radios and other DECT phones can cause
interference with your cordless phone.
Try installing your phone as far away as
possible from these types of electronic
devices.
• If other SIP telephones in your hotel are
having the same problem, the problem is in
the wiring or network server. Contact your
telephone service provider (charges may
apply).
I hear other calls when using the telephone.
• Disconnect the telephone base from the
network wall jack and connect a different
working SIP telephone. Check your SIP
server settings. If calls are still not clear, the
problem is probably in the wiring or network
server. Contact your telephone service
provider (charges may apply).
