10
Connection
1. Hold the
Bluetooth
®
Button
down for several seconds until the
Bluetooth
®
Button
lights up and flashes.
2. Enter the
Bluetooth
®
interface of your device and begin searching
for
Bluetooth
®
devices.
3. Select “VTech 5510 Microphone” when you see it displayed on
your device.
4. The microphone will provide audio for the PIN code, which you
will then enter on your device.
5. When the
Bluetooth
®
connection is successful, you will hear
a sound effect and the phrase “
Bluetooth
®
connected.” The
Bluetooth
®
Button
light will remain on.
6. To exit
Bluetooth
®
mode, hold the
Bluetooth
®
Button
until you
hear the phrase “
Bluetooth
®
disconnected.”
7. The next time you initiate the
Bluetooth
®
connection, the
microphone will automatically search and connect to the most
recent
Bluetooth
®
device that it was connected to. You will not
need to enter the PIN code again.
8. For best results, maintain a distance between the
Bluetooth
®
device and Sing It Out Karaoke Microphone
TM
of approximately
10 feet or less; the Sing It Out Karaoke Microphone
TM
may
disconnect when the distance to the
Bluetooth
®
device exceeds
10 feet.
AUTOMATIC SHUT-OFF
To preserve battery life, the Sing It Out Karaoke Microphone
TM
will automatically shut off after several minutes without any
button or voice input. The microphone can be turned on again by
pressing any button.
LOW BATTERIES
If the unit powers down or if the light fades out during play, please
install a new set of batteries.