4
Handset registration
An
S2310-6VDC
/
S2320-6VDC
handset must be registered to an
S2410
/
S2420
telephone base before use.
To register an S2310-6VDC handset:
Place the corded handset on the
S2410
VGNGRJQPGDCUGETCFNG*CPFUGVTGIKUVTCVKQPJCRRGPUCWVQOCVKECNN[VJGſTUVVKOGCJCPFUGV
is placed on the telephone base. When the registration process completes, the
MESSAGE WAITING
.'&ƀCUJGUQPEGCPF[QW
JGCTTKUKPIDGGRUCUEQPſTOCVKQP'CEJVGNGRJQPGDCUGCEEQOOQFCVGUWRVQJCPFUGVU
When you already have 4 registered
handsets, you can replace one of them by a new handset if any one of the 4 registered handsets is disconnected from the base.
F
QTGZCORNGKVKUQWVQHTCPIGQTKVUDCVVGT[KUTGOQXGFQTFGRNGVGF6JGRTGXKQWUTGIKUVGTGFJCPFUGVKUVJGPFGTGIKUVGTGFHTQOVJG
telephone base.
To register an S2320-6VDC handset:
Place the corded handset on the
S2420
VGNGRJQPGDCUGETCFNG*CPFUGVTGIKUVTCVKQPJCRRGPUCWVQOCVKECNN[VJGſTUVVKOGCJCPFUGV
is placed on the telephone base. When the registration process completes, the
MESSAGE WAITING
.'&ƀCUJGUQPEGCPF[QW
JGCTTKUKPIDGGRUCUEQPſTOCVKQP'CEJVGNGRJQPGDCUGCEEQOOQFCVGUWRVQJCPFUGVU
When you already have 4 registered
handsets, you can replace one of them by a new handset if any one of the 4 registered handsets is disconnected from the base.
Fo
TGZCORNGKVKUQWVQHTCPIGQTKVUDCVVGT[KUTGOQXGFQTFGRNGVGF6JGRTGXKQWUTGIKUVGTGFJCPFUGVKUVJGPFGTGIKUVGTGFHTQOVJG
telephone base.
Register a handset to another telephone base
Any contemporary trimstyle 1-line handset can register to any contemporary cordless 1-line telephone base. Any contemporary
trimstyle 2-line handset can register to any contemporary cordless 2-line telephone base.
When a registered handset is idle, place it on another telephone base. This handset automatically registers to the new telephone base.
Telephone settings
SIP contemporary trimstyle 1-line/2-line - S2310-6VDC/S2320-6VDC
All telephone settings are programmed through the administrative web portal.
Please refer to the
5+22*10'%QPſIWTCVKQP)WKFG
for details.
Telephone operation
SIP contemporary trimstyle 1-line - S2310-6VDC
Receive a call
When there is an incoming call, the telephone rings and the
TALK
MG[ƀCUJGU
.
To answer a call:
Press
TALK
or
/SPEAKER.
The
TALK
key illuminates when the phone line is in use. The
/SPEAKER
key illuminates when in
speakerphone mode.
Place a call
Press
TALK
or
/SPEAKER
. Listen for a dial tone and then dial the desired number
. The
TALK
key illuminates when the phone
line is in use. The
/SPEAKER
key illuminates when in speakerphone mode.
End a call
Press
OFF
or place the handset back in its charging base. The call ends when all handsets hang up.
Share a call
During a call, another handset can join the call by pressing
TALK
or
/SPEAKER
.
Speakerphone
During a call, press
/SPEAKER
to switch between speakerphone mode and handset earpiece mode.
Redial
The last dialed number on the handset is stored for 15 minutes.
To redial the last dialed number:
Press
TALK
or
/SPEAKER
to listen for a dial tone. Then press
REDIAL
.
Volume
Listening volume can be adjusted on the handset.
To adjust the listening volume:
During a call, press
-/
QPKVVQCFLWUVVJGNKUVGPKPIXQNWOG6JGPGZVECNNTGVWTPUVQVJGFGHCWNVNKUVGPKPIXQNWOG
