VTech PDL GX, Руководство пользователя

Страница: 47 / 56

V
TECH
E
NGINEERING
C
ANADA
L
IMITED
TITLE PDL GX Internal Product Specification
MODEL PDL GX
Reference: PRC 00DM Revision: 3.0 Page: 47 of 56
This document is proprietary to V
TECH
E
NGINEERING
C
ANADA
L
TD
. 26649
Specifications are preliminary and are subject to change without notice.
When the telephone line is ringing, the In Use/Charging LED will flash low intensity RED at a rate of 16
Hz during the ON cycle of the power ringing signal.
3.15.2.1 In Use/Charging LED Display State Priority (All Red LEDs)
LED Display State Indication Priority
Ringing 16 HZ FLASHING
LOW INTENSITY RED
during ON power ring cycle
1
(HIGHEST)
On Hold 4 Hz FLASHING
LOW INTENSITY RED
2
In Use SOLID
LOW INTENSITY RED
3
Charging SOLID
HIGH INTENSITY RED
4
No Handset in Cradle and Idle Mode OFF 5
(LOWEST)
3.16 Temporary Tone Activation
When the unit is setup for PULSE dialing (see Section 3.13 Setup Mode Options for details on dial type
setup), the user can temporarily switch to tone mode by pressing the
✼
key. This tone mode shall remain
active until the OFF key is pressed.
3.17 Ear Piece Volume Adjustment
The user can adjust the volume level of the incoming audio by pressing the
▲
or
▼
key. This can only be
done while the phone is off hook, not on HOLD, and not in any menu selection modes. The initial press of
either the
▲
or
▼
key will bring up the volume display at the current setting.
To adjust the volume press the
▲
or
▼
key to select the desired volume level. The number of filled
characters shown on the display denotes the volume levels. There are in total, 4 volume levels.
The volume level display will remain active for 5 seconds after the last
▲
or
▼
key press.
WPMVNF!]]]] WPMVNF!]]]] WPMVNF!]]]] WPMVNF!]]]]