pg
9
Your phone comes with three different coloured
handset covers. To change a cover:
1
Gently squeeze the arrows marked on either
side of the screen
2
Lift the cover and slide it away from
the keypad
3
Fit the two tabs at the top of the new cover
into the slots on the top of the handset
4
Click the cover into place.
Fixing your Mirage phone to a wall
Your phone comes with two wall fitting screws
and plugs. Make sure the plugs supplied are
suitable for your wall.
To fix your Mirage phone to a wall:
1
Use this template as a guide to mark the wall
before drilling
Check
•
that the leads reach your telephone socket
and mains power supply
•
that the handset will not be damaged or
cause damage if it is accidently knocked off
it’s base station
•
the position guidelines given in this setting up
guide
2
Use a spirit level or plumb line to ensure the
phone will hang straight
3
Drill two holes where you have marked, insert
the wall plugs and screws – leaving a 3mm
gap between the head of the screw and the
wall
4
Slide the base station onto the screws
•
make sure you don’t cut the telephone
line or power cord, this will damage your
phone and invalidate your warranty
Setting up
pg
8
1
Setting
up
55mm
1
Setting
up
1773 full guide/21.6br 22/6/00 4:15 pm Page 8
