background image

Additional Information

nance facility designated by the supplier. Any repairs or alterations made by the user to
this equipment, or equipment malfunctions, may give the telecommunications company
cause to request the user to disconnect the equipment.

Users should ensure for their own protection that the electrical ground connections
of the power utility, telephone lines and internal metallic water pipe system, if present,
are connected together. This precaution may be particularly important in rural areas.

Caution:

Users should not attempt to make such connections themselves, but should contact
the appropriate electrical inspection authority, or electrician, as appropriate.

Your cordless phone is designed to operate at the maximum power allowed by the FCC
and IC. This means your handset and base unit can communicate only over a certain
distance - which will depend on the location of the base unit and handset, weather, and
the construction and layout of your home or office.

FCC, ACTA, and IC Regulations

                                                  18

Содержание MI6821 - Cordless Telephone With Caller Id






























































Отзывы: