2
SETUP
1. For first time setup of Me-Mo-Mo™, please insert 2 AA batteries in the keyboard.
(2 AA batteries are not included for the keyboard).
2. Press the Power button
and watch Me-Mo-Mo™ spring to life! Press
any key on the keyboard to exit the demo mode.
3. Press the Power button
again and the clock mode will appear. You can
set the clock by following the directions in the "SETTING THE TIME" section of
this manual.
POWER SOURCE
Me-Mo-Mo™ operates on a total of 6 AA (UM-3/LR6) batteries and 1 CR2032
backup battery.
It will also operate using a 9V 300mA AC center-positive
(sold separately)
with 2 AA (UM-3/LR6) batteries and 1 CR2032 backup battery.
MAIN UNIT BATTERY INSTALLATION
(4 AA batteries come installed in the unit.)
1. Make sure the unit is turned OFF. The screen will be blank
or will show the clock mode.
2. Locate the battery cover on the back of Me-Mo-Mo™
and open it.
3. Insert 4 new AA (UM-3/LR6) batteries, as illustrated.
(The use of alkaline batteries is recommended for
maximum performance.)
4. Close the battery cover.
MAIN UNIT AC ADAPTOR CONNECTION
Use a standard 9V 300mA AC center-positive
adaptor instead of the 4 AA
batteries in the main unit. The power adaptor is sold separately.
1. Make sure the unit is OFF or in the clock mode.
2. Locate the adaptor jack at the bottom of Me-Mo-Mo™.
3. Plug the adaptor into the unit’s adaptor jack.
4. Plug the adaptor into a wall outlet.
NOTE: Do not leave the adaptor plugged in for long periods of time if the unit is
not in use.
47100 I/M 2
5/15/01, 11:44
2
