VTech Kidizoom FLIX, Руководство для родителей

Страница: 8 / 32

8
GETTING STARTED
When using your Kidizoom
®
FLIX
®
for the first time, you will need to
switch the Master Power Switch to the
ON position
. You may need
a small tool (such as a paperclip) to move the switch to the ON position
. When the Master Power Switch is set to the OFF position , it
will not be possible to charge or operate
FLIX.
NOTE: It is not necessary to move the Master Power Switch to the
OFF position
in daily use. only move the switch to the OFF
position when Kidizoom
®
FLIX
®
will not be in use for an extended
period of time.
BATTERy RECHARGING
NOTE: Adult operation required.
To charge
Kidizoom
®
FLIX
®
, you will first need to connect it to a
computer using the included Micro-USB cable. To do so correctly,
please follow the below steps:
• Make sure that the Master Power Switch is set to the
ON position
before charging.
• Pull up the rubber cover of the Micro-USB port on the side of
FLIX.
• Insert the Micro-USB cable (small end) into the Micro-USB port on
FLIX.
• Insert the large end of the Micro-USB cable into a USB port on the
computer. A USB port is usually marked with this symbol:
• once the connection is successful, you will see the battery
recharging symbol appear on the screen.
• Check the charging progress regularly throughout recharging.
• When the battery is fully charged, a message will be displayed on the
screen confirming so, then the screen will automatically turn off. You
may then disconnect your fully charged
FLIX from the computer.
NOTE: It will take approximately 3 hours to fully charge the battery.
The actual charging time depends on the charging current, the
remaining charge on the battery prior to recharging and the ambient
temperature of the charging environment. The optimum ambient
temperature is 0°C to 40°C. If your FLIX needs a much longer time to
fully charge the battery, try another USB charger.