VTech Kidizoom FLIX, Руководство для родителей

Страница: 13 / 32

13
NOTE: If a memory card is being used, data stored in the internal
memory cannot be seen in FLIX unless the memory card is removed.
To prevent accidental data loss, make sure you have backed up all
important data from your memory card before using it.
CONNECTING TO A COmPUTER
You can connect
Kidizoom
®
FLIX
® to a PC or Mac computer using
the Micro-USB cable. once connected, you can transfer files between
FLIX and your computer. Please follow the below steps to make the
connection.
• Pull up the rubber cover of the Micro-USB port on the side of
FLIX.
• Insert the Micro-USB cable (small end) into the Micro-USB port of
FLIX.
• Insert the larger end of the Micro-USB cable into a USB port of the
computer. A USB port is usually marked with this symbol:
• Two removable drives called VTech 5075 and VT SYSTEM will
appear. VTech 5075 is for storage of your data; VT SYSTEM is
for storage of system data and cannot be accessed. If there is a
memory card in FLIX, the removable drive will show the content on
the memory card only.
NOTE: once FLIX is connected to your computer, do not disconnect it
whilst files are transferring. only when FLIX has completed transferring
files should you eject it from your computer. once ejected, you can
then physically disconnect
FLIX from your computer.
To avoid any potential damage to your Kidizoom
®
FLIX
®
:
• When the Micro-USB cable is not connected to FLIX, ensure that
the Micro-USB rubber cover is fully covering the Micro-USB port of
FLIX.
• Please ensure that the microSd card slot rubber cover of
FLIX is
fitted in place.
To back up photo or video files taken by Kidizoom
®
FLIX
®
:
• Locate and open the subfolders within the dCIM folder in the
removable drive VTech 5075.