30
Advanced Operations
Handset Speakerphone Operation
Your
i 5867
Handset has a built-in handsfree speakerphone. This feature allows you to
stand the Handset upright on a table or desktop and have handsfree conversations. For
more information, refer to
Making Calls
in the
Handset Operation
section.
Line in Use Indication
When the telephone line is currently being used
by a
i 5867
system Handset, a status message
similar to this will display on idle Handset(s):
When the telephone line is currently being used
another phone (other than an
i 5867
system
Handset), the phone icon will remain on steadily,
and
EXTENSION IN USE
will be displayed:
Handset Operation
Conference Calling
The
i 5867
is capable of supporting conference calls with up to two registered Hand-
sets. To enter a conference call, simply access the line with two extensions by press-
ing
ON
(or
SPEAKERPHONE
) on the Handset. The phone icon
and two extension
numbers will be displayed in the upper left corner of the Handset display.
Transferring Calls
You can transfer calls with the
i 5867
system from Handset to Handset.
Blind Transfer:
You can directly transfer any active call to another
i 5867
extension without notification
by following these steps:
• Press the middle NavKey then press the up or down NavKey to the desired location.
•
Press the middle NavKey to confirm.
•
The ringing Handset can pick up the transferred call like a regular incoming call.
Announced Transfer:
You can perform an announced transfer (call and advise another extension) of an
active call by following these steps:
•
Press
HOLD
to place your call on hold.
•
Press any NavKey then press the left NavKey to select
Intercom,
press the middle
Navkey in again to confirm.
-OR-
Press any NavKey then press the
1
key.
•
Press the up or down NavKey to the desired location.
•
Press the middle NavKey to confirm.
•
When the ringing Handset answers, announce that there’s an active call on hold.
•
Press
OFF
on either handset.
•
Press
ON
(on the destination Handset) to pick up the call on hold.
1
CID LOG
REDIAL
EXTENSION
IN USE
12:30 PM
1
CID LOG
REDIAL
LINE IN USE
12:30 PM
1
Handset Locator (from Base):
Press the
PAGE
button from the Base Unit to page all Handsets. Each Handset will beep
for 20 seconds to alert you to their locations. To stop the beeping, press
ON
or any dial pad
button on the Handset, or
PAGE
on the Base Unit.
