24
25
B
L
U
E
T
O
O
T
H
When a device is successfully connected, you hear a
confirmation tone. The corresponding status icon (
1 or 2)
displays, and the corresponding device light on the telephone
base ( 1 or 2) turns on.
NOTES
The pairing process may take up to one minute. If the pairing
process fails, try again.
When a connected headset is charging, it may disconnect
from the telephone base and the corresponding light on the
telephone base ( 1 or 2) turns off. For some headset
models, you may need to turn on the headset and reconnect it
to the telephone base again.
4.3.3 Auto Connection
When an active device moves within Bluetooth range of the telephone
base, or is turned on within range, the telephone base tries to connect
to the device. When the device moves out of range, it is disconnected.
Your device might make a connect or disconnect sound.
A connected device could also be disconnected by:
Turning off the Bluetooth device.
Turning off the Bluetooth feature of the device.
Disconnecting through the telephone base
Active Device list
or
Paired Device list
. The telephone base will not attempt to
reconnect until your device is moved out of range and then moves
back in range again.
4.3.4 Device Lists and Connection
Up to four devices can be paired to the telephone base. All paired
devices are shown on the Paired Device list. To use a paired device,
it must be in an active slot on the Active Device list and connected.
Only one Bluetooth
mobile phone or a headset can be on a call at a time.
Once you have paired a device with the telephone base, you do not
need to repeat the pairing procedure again unless you delete the
device from the Paired Device list.
11.
1.
2.
