VTech EzRay Air Portable Скачать руководство пользователя страница 3

Страница: 3 / 103

Notice

EzRay Air Portable (Model: VEX-P300) User Manual

Notice

The

EzRay Air Portable

(Model: VEX-P300) is a portable dental X-ray system.

This manual contains descriptions, operational instructions, imaging procedures for the

EzRay Air Portable

(Model: VEX-P300) dental X-ray system. It is recommended that

you thoroughly familiarize yourself with this manual to make the most effective use of

this device. Observe all cautions, safety messages, and warnings that appear in this

manual.

Always keep this manual with the device and review the operating procedures and

safety instructions if needed.

The illustrations/photos of the device in this manual are only for illustration purposes.

The actual device may differ.

Due to continuous technological improvements, the manual may not contain the most

updated information. For further information not covered in this manual, please contact

us at:

VATECH Co., Ltd.

Phone:

(+82) 1588 9510

E-mail:

[email protected]

This document is originally written in English.

The

EzRay Air Portable

is referred to as

device

in this manual.

Manual Name: EzRay Air Portable (Model: VEX-P300) User Manual

Document number: VDH-UM-067

Version: 1.49

Publication Date: 2020-11

The

EzRay Air Portable (Model: VEX-P300)

unit is intended

to be used by a

certified professional

for dental radiography

only.

Содержание EzRay Air Portable








































































































Результаты поиска

Содержание EzRay Air Portable

Отзывы:

Похожие инструкции для EzRay Air Portable

Бренды по названию

Популярные бренды

VTech EzRay Air Portable, Руководство пользователя

Результаты поиска

Содержание EzRay Air Portable

Отзывы:

Похожие инструкции для EzRay Air Portable

Бренды по названию

Популярные бренды