Configuration File Parameter Guide
162
VSP736 Administrator and Provisioning Manual
Setting:
provisioning.remote_check_sync_enable
Description:
Enables or disables remotely triggering the device to check for new firmware
and/or configuration files. The file checking is triggered remotely via a SIP
Notify message from the server containing the
check-sync
event.
Values:
0 (disabled), 1 (enabled)
Default:
1
Setting:
provisioning.crypto_enable
Description:
Enables or disables encryption check for the configuration file(s). Enable
if you have encrypted the configuration file(s) using AES encryption.
Values:
0 (disabled), 1 (enabled)
Default:
0
Setting:
provisioning.crypto_passphrase
Description:
Sets the AES encryption passphrase for decrypting the configuration
file(s). Enter the key that was generated when you encrypted the file.
Values:
Text string
Default:
Blank
Setting:
provisioning.check_trusted_certificate
Description:
Enables or disables accepting only a trusted TLS certificate for access to
the provisioning server.
Values:
0 (disabled), 1 (enabled)
Default:
0
Setting:
provisioning.pnp_enable
Description:
Enables or disables the VSP736 checking for the provisioning URL using
the Plug-and-Play Subscribe and Notify protocol.
Values:
0 (disabled), 1 (enabled)
Default:
1
Setting:
provisioning.pnp_response_timeout
Description:
Sets how long the VSP736 repeats the SUBSCRIBE request if there is
no reply from the PnP server.
Values:
1–60
Default:
10
