VTech DigiGo, Руководство пользователя

Страница: 22 / 23

20
IMPORTANT NOTE:
Creating and developing DigiGo™ products is accompanied by a
responsibility that we at VTech
®
take very seriously. We make every effort
to ensure the accuracy of the information that forms the value of our
products. However, errors sometimes can occur. It is important for you to
know that we stand behind our products and encourage you to call our
Consumer Services Department at
01235 546810 (from UK), or +44 1235
546810 (outside UK), with any problems and/or suggestions that you might
have. A service representative will be happy to help you.
This product is
licensed under the AVC patent portfolio license for the personal use of
a consumer or other uses in which it does not receive remuneration to
(i) encode video in compliance with the AVC standard (“AVC video”)
and/or
(ii) decode AVC video that was encoded by a consumer engaged in a
personal activity and/or was obtained from a video provider licensed to
provide AVC video.
No license is granted or shall be implied for any other use. Additional
information may be obtained from MPEG LA, L.L.C. See
http://www.mpegla.com
Disclaimer and Limitation of Liability
VTech
®
Electronics Europe PLC and its suppliers assume no responsibility
for any damage or loss resulting from the use of this handbook. VTech
®
Electronics Europe PLC and its suppliers assume no responsibility for
any loss or claims by third parties that may arise through the use of this
software.
VTech
®
Electronics Europe PLC and its suppliers assume no
responsibility for any damage or loss caused by deletion of data as a
result of malfunction, dead battery, or repairs.
Be sure to make backup copies of important data on other media to
protect against data loss.
Company: VTech
®
Electronics Europe PLC
Address: Napier Court, Abingdon Science Park, Abingdon, Oxon, OX14 3YT.
Phone : 01235 546810 (from UK), or
+ 44 1235 546810 (outside UK)
Hereby,
VTech®
, declares that this DigiGo™ is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC.
A copy of the declaration of conformity can be obtained from the website:
www.vtech.com/rtte-directive.
USB cable with ferrite must be used with this equipment to ensure
compliance with the EMC Directive 2004/108/EC limits.