VTech CS6948, Руководство пользователя

Страница: 20 / 59

14
Telephone base speakerphone:
When the corded handset is on a call,
press /SPEAKER to switch between
the telephone base speakerphone and
the corded handset.
When the speakerphone is active, the
telephone base displays Speaker and
the /SPEAKER light turns on.
Volume
To adjust the listening volume on
a cordless handset:
During a call, press /VOLUME or
/VOLUME .
To adjust the listening volume at
the telephone base:
During a call, press VOL or VOL .
NOTES
The handset and speakerphone volume
settings are independent.
When the volume reaches the minimum
or maximum setting, you hear two beeps.
Mute
The mute function allows you to hear
the other party but the other party
cannot hear you.
During a call, press MUTE . The
screen displays Muted until the mute
function is turned off.
Press
MUTE again to resume the
conversation. The screen displays
Microphone on briefly.
•
•
•
•
•
Join a call in progress
You can use the telephone base and
a cordless handset, or two cordless
handsets at a time on an outside call.
To join a call with a cordless
handset:
When a handset or the telephone
base is already on a call, press
or
on another handset to join the call.
Press
OFF
or place the handset in
the handset charger to exit the call.
The call continues until both devices
hang up.
To join a call with the telephone
base:
Lift the corded handset or press
/SPEAKER
.
Place the corded handset back to the
telephone base or press
/SPEAKER
to exit the call. The call
continues until both devices hang up.
Call waiting
When you subscribe to call waiting
service with your telephone service
provider, you hear an alert tone if there
is an incoming call while you are on
another call.
Press FLASH to put the current call
on hold and take the new call.
Press
FLASH
at any time to switch
back and forth between calls.
If you also subscribe to caller ID
service, it will let you see the name and
telephone number of the caller during
call waiting.
•
•
•
•
•
•