10
Find handset
Use this feature to find the system handset.
To start paging:
• Press
FIND HS
on the telephone base
when not in use.
All idle handsets ring and display
** Paging **
.
To end paging:
• Press
FIND HS
at the telephone base.
-OR-
• Press
TALK
or any of the dialing keys
on the handset.
NOTES
NOTE
NOTES
• Press
MUTE
to turn off the ringer of a
handset temporarily. Paging tone continues
on the other handset.
• Do not press and hold
FIND HS
for more
than four seconds. It may lead to handset
deregistration. If the handset displays
To
register HS
and
See manual
, refer to the
Register a handset
section to register the
handset back to the telephone base.
Redial list
Each handset stores the last five telephone
numbers dialed. Entries are shown in
reverse chronological order. When there
are already five entries, the oldest entry is
deleted to make room for the new entry.
Review a redial list entry
1. Press
REDIAL
when the handset is not
in use.
2. Press
q
,
p
or
REDIAL
repeatedly until
the desired entry displays.
Dial a redial list entry
1. Press
REDIAL
when the handset is not
in use.
2. Press
q
,
p
or
REDIAL
repeatedly until
the desired entry displays.
3. Press
TALK
to dial.
-OR-
1. Press
TALK
when the handset is not
in use.
2. Press
REDIAL
and then press
q
,
p
or
REDIAL
repeatedly until the desired
entry displays.
3. Press
SELECT
to dial.
Delete a redial list entry
1. Press
REDIAL
when the handset is not
in use.
2. Press
q
,
p
or
REDIAL
repeatedly to
browse to the desired entry.
3. Press
DELETE
to delete the displayed
number. You hear a confirmation tone.