VTech CL6527A Скачать руководство пользователя

Страница: 8 / 87

are not sure of the type of power supply in your home

or office, consult your dealer or local power company.

9. Do not allow anything to rest on the power cord. Do

not install this product where the cord may be walked

on.

10. Never push objects of any kind into this product

through the slots in the telephone base or handset

because they may touch dangerous voltage points or

create a short circuit. Never spill liquid of any kind on

the product.

11. To reduce the risk of electric shock, do not disassemble

this product, but take it to an authorized service facility.

Opening or removing parts of the telephone base or

handset other than specified access doors may expose

you to dangerous voltages or other risks. Incorrect

reassembling can cause electric shock when the

product is subsequently used.

12. Do not overload wall outlets and extension cords.
13. Unplug this product from the wall outlet and refer

servicing to an authorized service facility under the

following conditions:

• When the power supply cord or plug is damaged or

frayed.

•  If liquid has been spilled onto the product.
•  If the product has been exposed to rain or water.
•  If the product does not operate normally by

following the operating instructions. Adjust only

those controls that are covered by the operation

instructions. Improper adjustment of other controls

may result in damage and often requires extensive

work by an authorized technician to restore the

product to normal operation.

Содержание CL6527A























































































Результаты поиска

Содержание CL6527A

Отзывы:

Похожие инструкции для CL6527A

Бренды по названию

Популярные бренды

VTech CL6527A, Руководство пользователя

Результаты поиска

Содержание CL6527A

Отзывы:

Похожие инструкции для CL6527A

Бренды по названию

Популярные бренды