Add and register a pendant
When first purchased, charge the pendant in the pendant charger. You
hear three beeps every 0 seconds when the pendant is not registered.
The new pendant should be charged without interruption for at least
30 minutes before registering it to the telephone base.
Make sure the pendant is out of the pendant charger and turned on.
To register a pendant to your SN1157/SN1197/SN6147/SN6197
telephone base:
Press
MENU
on the telephone base when idle.
Scroll to
Settings
, then press
SELECT
.
Scroll to
Registration
, then press
SELECT
.
The telephone base shows
Registering...
Please wait
.
Put the pendant in the pendant charger.
The pendant status light flashes red and green to indicate the
registration is in progress. Then
PENDANT Registered
appears
on the telephone base, and both devices beep. The pendant is now
registered with the telephone base. It takes up to 60 seconds to
complete registration.
If you have already set the photo speed dial keys
1
and
2
, the
telephone base displays
Copied Photo Speed Dial 1 to Pendant
Memory 1
. Press
NEXT
, then the telephone base displays
Copied
Photo Speed Dial 2 to Pendant Memory 2
. Then press
OK
.
-OR-
If you have not set the photo speed dial keys
1
and
2
, see
To
set photo speed dial
in the
SN1157/SN1197/SN6147/SN6197
Abridged user’s manual
to set them.
If registration fails, the telephone base displays
Registration failed
and
you hear an error tone. Start again from Step above.
.
2.
3.
.
.