30
31
Appendix
Troubleshooting (continued)
Why does the parent unit react too quickly to other
sounds?
The baby unt also detects other sounds than those of your baby.
Adjust the senstvty level to a lower level or adjust the speaker
volume on the parent unt.
Why does the parent unit vibrate frequently when the
lullaby is turned on?
The lullaby wll trgger the vbraton alert frequently. Avod usng
lullaby and vbraton alert at the same tme.
Why don’t I hear a sound/Why can’t I hear my baby cry?
The volume of the parent unt may have set too low. Press
to ncrease the volume level.
You may have set a low sound senstvty level. See A
djust the
sound sensitivity of the baby unit
to change the settng.
Why does the parent unit beep?
If the parent unt s n mute and the sound alert feature s on, there
s sound detected from the baby unt.
The baby unt may be out of range. Move the parent unt closer to
the baby unt (but not less than 2 metres).
If the parent unt s powered by the provded battery, t may not have
enough charge for the parent unt to perform normally. Charge the
battery n the parent unt for up to 11 hours.
Why can’t I establish a connection? Why is the
connection lost every now and then? Why are there
sound interruptions?
The baby unt may be out of range. Move the parent unt closer to
the baby unt (but not less than 2 metres).
Other electronc products may cause nterference wth your baby
montor. Try nstallng your baby montor as far away from these
electronc devces as possble.
•
•
•
•
•
•
•
•
•
