VTech 2425, Руководство пользователя

Страница: 17 / 39

1 7
Range Extender
Your 2425 has an enhanced feature that is designed to improve performance.
If you are using your system in an area with excessive interference, or you
require a moderate increase in operating range, the Range Extender feature
can help to improve both the sound quality and range. Actual range will depend
on your environment.
Your 2425 comes preset for AUTO Range Extedner mode.
To select another Range Extender setting, follow the procedure listed below:
Note : When Range Extender mode is enabled, your 2425 will consume
more battery power. That means the standby and talk time of your
Handset will be shorter.
• In the idle(OFF) mode, press
MENU and use the scroll keys
to select RANGE EXTENDER,
then press OK.
• There are 3 option settings in
the RANGE EXTENDER menu:
1. Select OFF to disable
RANGE EXTENDER
2. Select ON to enable RANGE
EXTENDER. An "E" icon will
appear in the upper left
corner of the Handset
display, indicating that
RANGE EXTENDER is ON.
3. Select AUTO to allow your 2425 to automatically monitor the signal
strength between the handset and base unit, and activate whenever
necessary. With this option selected, your 2425 system will enable
and disable the RANGE EXTENDER feature as needed. When
RANGE EXTENDER is enabled, an "E" icon will appear in the upper
left corner of the Handset display.
• Use the scroll keys to select the desired setting, and then press OK
to confirm the selection.
Register
Use this option to register a Handset to the 2425 Base. You can register
a total of four Handsets. This process is activated automatically whenever
a new handset is powered up in range of the Base.
You will be prompted to enter the 15-digit Base ID code printed on the
underside of the base unit. After entering this code, press OK. The Handset
will display SEARCHING FOR BASE, and then FOUND BASE when the process
is complete.
Note : Base ID codes are 15 digits long and can include the following
characters : 0, 1, 2, 3, 4, 5, 6, 7, 8, 9,
*
, or
#
.
Basic Operation