Changing Channels
•
If you notice interference while on a call, press
CHAN
to switch to a clearer channel.
TONE/PULSE Setting
• If you have touch tone service, press
PROG
,
*
,
*
,
MEM
to switch to
TONE
dialing.
• If you have rotary service, press
PROG
,
*
,
#
,
MEM
to switch to
PULSE
.
NOTE:
Your
t 2408
is preset at the factory for
TONE
dialing.
Temporary Tone
If you have rotary (pulse) telephone service, this
feature allows you to enter special codes and tones
to use electronic banking services, calling cards,
or other special services.
• Dial the number as you normally would.
• Press
*
(tone). This will activate the temporary
tone feature.
• Keys pressed after this will send touch tone
signals.
• To end the call, press
OFF
or place the handset
back in the base. The phone will automatically
go back to rotary service.
Programming Ringer Type
You can choose from four ring tones or turn the
ringer off to extend the battery life.
• Make sure the handset is
OFF
, press
PROG
.
• Press the
#
key.
• Press a key 1 - 4 to select a ringer type.
-OR-
• Press 5 to turn the ringer off.
• Press
MEM
to confirm your selection.
Checking Ringer Type
To check the ringer that is currently programmed:
• Press
PROG
.
• Press the
#
key.
• Press
0
.
• Press
MEM
to confirm.
Operating Instructions
Basic Operation
10
