0
POwER-fAIL bACkUP MODE
Power-fail mode allows your telephone system to
function in the event of a power outage. The telephone
system uses stored power from the handset’s battery to
operate.
After the power goes out, if there is already a handset
with enough charge placed in the telephone base,
the telephone system enters battery backup mode
automatically. That handset screen shows
Powering
base... Don’t pick up
. All other handset screens show
Battery backup mode
.
-OR-
If there is no handset placed in the telephone base after
the power goes out, all handsets show
Out of range OR
no power at base
and
Put HS on base
to power base
alternatively. Place any handset with enough charge in
the telephone base. Its screen shows
Powering base...
Don’t pick up
. All other handset screens show
Battery
backup mode
.
Note:
A handset which does not have enough charge to
power up the base, its screen shows
Out of range OR no
power at base
and
Not enough battery to power base
alternatively after the power goes out. Find another system
handset that has enough charge to activate the mode.
