13
sETTING UP
Telephone base installation
Install the telephone base as shown below. Make sure
you clicked the wall mount bracket securely into the
mounting slots before plugging in the adapter and
telephone line cord.
Note:
Ensure power cord is fed through slot on base so
unit sits lush with the desk.
Raise the antenna.
Plug the other end
of the telephone
line cord into the
telephone jack on
the back of the
telephone base.
Route the power
adapter cord
through this slot.
Plug the small end of the
telephone base power adapter
into the power adapter jack on
the back of the telephone base.
Plug the large end
of the telephone
base power
adapter into a
power outlet.
Plug one end of the
telephone line cord
into a telephone jack
or a DSL ilter.
If you have DSL
high-speed
Internet service,
a DSL ilter (not
included) is
required.
Route the
telephone line cord
through this slot.
Click the wall
mount bracket
securely into the
mounting slots
for tabletop use.
