VTech Baby Push and Ride Alphabet Train, Руководство пользователя

Страница: 7 / 14

7
2. Install the two green back engine wheels
onto the back of the engine by inserting
them into the yellow sockets at the back
of the train. Push the wheels into the
sockets until you hear a click. once you
have installed the wheels, they cannot
be removed.
3. Install the four green carriage wheels with axle trees into the sides
of the bottom of the carriage. Place the covers over the axles. use
a screwdriver to tighten the screws.
4. Position the handle so that the curved
part of the handle faces the back of
the engine. Insert the handle into the
hole in the top of the engine until you
hear a click. once you have installed
the handle, it cannot be removed.
5. Position the soft, blue hinge so that its large hole is facing up and to
the front. Insert the hinge into the hole at the front of the carriage,
use a screwdriver to tighten the two screws on the bottom of the
carriage.
Assembly Instructions