VST FDUSB-M, Руководство пользователя

Страница: 6 / 12

4
Your VST USB Floppy Drive includes six snap-on covers in a variety of colors. If
you want to change the color of your floppy drive, follow these instructions:
1. The cover is attached to the case
using a latch, as shown in Figure 1.
2. Place the drive on a flat surface.
3. a. Using your thumb:
Insert your thumbnail between the cover
and the case at the crevice, as shown in
Figure 2. Lift up the cover to release the
latch and slide the cover towards the front
of the case and remove.
or
3. b.
Using a small paper clip:
Insert the small paper clip between the
cover and the case at the crevice, as shown
in Figure 3. Lift the free end of the paper
clip up and forward to release the latch.
Slide the cover towards the front of the
case and remove.
4. To install the new cover, slide the cover
along the grooves on the sides of the drive,
as shown in Figure 4.
Caution : Please remove cover with care to avoid damaging the drive
or cover.
Enjoy your VST USB Floppy Drive’s new color and change covers as
often as you wish!
Changing the Snap-On Covers
Figure #3
Figure #1
Figure #4
Figure #2