VST FDUSB-M, Руководство пользователя

Страница: 5 / 12

Installation
To get started, follow these easy steps:
Mac OS Users:
1. Insert the VST USB Floppy Drive Installation CD into the CD-ROM Drive.
2. Double-click on the VST USB Floppy Drive Installer icon and follow the
directions, then restart your computer.
3. A USB cable is attached to the back of your USB Floppy Drive. Plug the
free end of the USB cable into the USB port on your Macintosh.
(see note below)
4. Insert a formatted floppy diskette into the floppy drive. A floppy icon
will appear on your Macintosh desktop.
Note: The USB ports on the Mac keyboard do not supply enough
power for the VST USB Floppy Drive. It must be connected to one of
the ports on the Mac itself, or to a powered USB hub.
Windows PC Users:
1. A USB cable is attached to the back of your USB Floppy Drive. Plug the
free end of the USB cable into the USB port on your PC.
2. Windows will recognize that a USB Floppy Drive is connected to your
computer, and assign it the next available drive letter.
3. Insert the VST USB Floppy Installation CD into the CD-ROM drive.
4. Follow the instructions recommended by Windows to install the USB
Floppy Drivers that are located on the Installation CD. When Windows
asks you where to search for the drivers, check the box labeled "CD-
ROM Drive".
Note: If the setup program has trouble installing files, insure that the
"Copy files from"box correctly identifies the designator for your CD-
ROM Drive. If necessary, change the drive designator.
5. You will see the USB Floppy Drive icon in My Computer or Windows
Explorer. Click on the icon to access your USB Floppy Drive.
Congratulations!
You are now ready to use your VST USB Floppy Drive.
3