Flat-Top Parts Identification
Installation
3
1.
The VSSI Hydraulic Surgery Table
arrives pre-assembled, requiring
only minor attention to be fully
serviceable. After removing the
table from its packaging, the table
needs to be placed in the desired
position within your facility.
Because the table is very heavy, we
recommend using a four-wheeled
furniture cart to make moving the
table easier. If a cart is not available,
please use care when lifting and
carrying the table.
To Lift The V-top
Surgery Table:
When moving a V-top surgery table,
NEVER lift the table by its V-panels!
If your table is equipped with the
adjustable column, lower the table top
to its lowest position. This will be the
position the table has arrived in. Refer
to “Features/Operation”, page 5, for
adjusting instructions.
continued
Top Tilt Adjustment
Control Lever
(Under end of top)
Hydraulic
Lift Column
Drain Bucket Hook
(Under drain hole)
Drain Hole
Flat-Top Panel
Raised Anti-Drip Edges
Quick Release
Tie-Down Cleats
(Four per table)
Tie-Down Rails
(One on each side)
Low Profile Base
with Stainless
Steel Cover
Adjustable Feet
