VSPHOENIX VSPHOENIX S, Руководство по эксплуатации, Страница: 23 / 26

VSPHOENIX S MANUAL 45 44 VSPHOENIX S MANUAL
1. Check the speaker cable and re-connect and change the cable if there is problem. If no problem is found, check the volume
setting at the setup mode.
1. Check the I/O board and need to change if there is problem.
2. Remove the dart tip or clean the target. But, you need to change the target if there is problem with target itself.
8. Sticking during the game ( it will mark as OO MATRIX STUCK)
1. Check if lamp on bill accepter is flashing.
2. Check if bill accepter cable is corretly connected.
3. Clean lense with a soft patch (alcohol) after checking if there are dirts on lense cover of bill accepter.
4. Check if dip switch on bill accepter is correctly set.
5. Replace I/O board if there is no problem found on bill accepter.
7. If it doesn’t recognize the bill
5. If sound is not working
Speaker Cable
2. If there is problem with test mode, adjust the volume. If the problem is continuing, check the audio input cable (green) at the main board.
Audio INPUT Cable(Green)
VOLUME CONTROL
MASTER
GAME
AWARD
INTRO
BGM
128
128
128
128
128
SETUP MODE EASY SETUP VOLUME CONTROL
4. Replace SSD or Macinboard when no problem was found on lower woofer after replacement of woofer.
3. If there is no problem is found in audio input cable, check the woofer at the bottom.
※
Check the woofer status: Power/ adjust volume / cable connection status
※
If the audio input cables are not connected properly,
only one of left and right speakers works.
1. Check the speaker cables on both right and letf back sides of target.
2. Check upper and lower of the speaker cables on middile of upper part.
3. Check lower woofer speaker cable.
4. If the problem is not solve with the above solution, change the broken speaker.
5. Check solderings of RCA 4P.
6. Change mainboard
1. Chack if the sample coin is placed properly in coin machine.
2. Check the cable connection. Reconnect the cable if there is problem.
3. Check the coin machine. Change the coin machine if there is problem.
4. Check an I/O board. Change the I/O board if there is problem.
5. You need to change the cable if the problem continues.
6. If it doesn’t recognize the coin
How to Solve VSPHOENIX S Problem How to Solve VSPHOENIX S Problem
If only one speaker is working.
Woofer
Coin Machine
Coin Machine Cables
RCA 4P
SSD(64GB)
BILL
Front of bill accepter LED Locking lever on bill accepter lense
Bill accepter cable