background image

 

Pulse Generator Version: 1.0 

www.VSpeak-modell.de

 

Page 1/4 

 

 

   Pulse Generator 

 

Manual Version 1.0 

 

Introduction 

 

 

22 mm 

30 mm 

As the name already suggests, the pulse generator can be used to 
generate ON /  OFF pulses  in  the model. Both  the times for the 
ON  and  OFF  duration  can  be  set,  as  well  as  the  ON  and  OFF 
positions.  With  a  3  step  switch,  from  the  transmitter  can  then 
select the respective operating mode between OFF, PULSE and 
ON. 
One  possible  application  would  be  e.g.  the  control  of  a  smoke 
pump, in flight would thus be "smoke clouds" of equal length and 
at equal intervals possible. 

Содержание Pulse Generator

Страница 1: ...erate ON OFF pulses in the model Both the times for the ON and OFF duration can be set as well as the ON and OFF positions With a 3 step switch from the transmitter can then select the respective operating mode between OFF PULSE and ON One possible application would be e g the control of a smoke pump in flight would thus be smoke clouds of equal length and at equal intervals possible ...

Страница 2: ...ces that are otherwise directly plugged into a servo slot of the receiver can be connected to the output the 3 pin post connector Attention The pin marked has the same voltage as the input ie When the output is not connected special care must be taken with regard to a short circuit 1 3 LED Indicator LED green ON servo output position ON green flashing servo output in PULSE operation with the LED O...

Страница 3: ...he button or Value change with the buttons resp Example PowerBox With the PowerBox system the same settings as with the JetiBox are possible via the P Bus In addition you can also select the servo channel 1 26 with which the Pulse Generator is controlled and the setting of the priority for the status telemetry value It can be chosen between low high higher at highest where low is sufficient The st...

Страница 4: ...ies with the following European directives 2004 108 EC EMC Directive 2006 95 EC Low Voltage Directive LVD 2011 65 EC Restriction of Hazardous Substances RoHS The presumption of conformity is taken by applying the following harmonized standards EN60065 Audio video and similar electronic aparatus Safety requirements EN60332 Tests on electric and optical fibre cables under fire conditions EN60950 Inf...

Отзывы: