VSpeak FLOW-meter 1.0, Руководство пользователя, Страница: 17 / 29

FLOW-meter Version: 1.0 www.VSpeak-modell.de
Page 17/29
2.3.4 Parameterization
The change of sides takes place
with Enter and ESC button of the
SmartBox or with the appropriate
buttons on the HoTT transmitter.
The parameter is selected with
the INC- and DEC-buttons of the
SmartBox
(or the buttons oft he Hott
transmitter) „
>
“.
2.3.4.1 Alarms
Settings
Value range Step size
Signal tone
OFF,50 . . . 2500 ml 10 ml U
OFF,10 . . . 500
ml/min
10 ml/min T
200 . . . 20000 ml 50 ml
Upon delivery, the warning thresholds are set as shown in the picture.

Reserve
The alarm Reserve is signaled when the FUEL display = consumed and when
[TankSize - Reserve] is exceeded…. or if the fuel gauge falls below (FUEL display = level).

FLOW
The FLOW alarm is signaled when the current fuel flow set under FLOW is undershot.
This alarm can therefore be used to detect turbine OFF.
The turbine OFF monitoring is started after the value set in FLOW has been exceeded for
the first time

TankSize
Volume off the main tank in ml.
With or the value of the
selected parameter is enabled for change
(inverted).
Witht the value can be increased,
with it can be reduced.
Stored is after or
.
SET
INC
SET
DEC
+ DEC INC
+ DEC INC
ESC
ENTER
DEC
INC