VS 910 21853-024, Руководство по эксплуатации, Страница: 37 / 50

37
4
Memory position button Display
Up Down Memory button
1 3 2
Up Down Down Down Up Up Display
4.2 Operation: Standard table handswitch with / without
display [Figure 1-3]
Height adjustment
Press the button to move the table upwards. Press the button to move
the table downwards. The drives continue to run for as long as you hold the
button down. The current height of the table is displayed in cm in the display.
4.3 Operation: Table handswitch with display and memory
[Figure 4]
Height adjustment, see 4.1
- Memory
The controller can travel to 3 memory positions.
- Save
Adjust the table as required using / buttons.
- Press the S button. The display flashes for 2 seconds.
- Within 2 seconds, press one of the memory position buttons to store
the set position.
- The display shows “1”, “2” or “3” to confirm that the position has been
stored successfully depending on which memory button you have pressed.