VS 21831, Руководство по эксплуатации, Страница: 47 / 64

47
The three intervals are:
-- Interval 1: Reminder after 55 minutes of sitting
-- Interval 2: Reminder after 50 minutes of sitting
-- Interval 3: Reminder after 45 minutes of sitting
The standard interval selected by default reminds you after 55 minutes.
In this case the LED glows with the weakest intensity or only one bar
lights up in the light strip. You caneasily switch between the intervals
by pressing the “bell” button. If the LED or bar does not light up then
the reminder function is deactivated.
You can use the Desk Control App to customise the three intervals to
user-defined functions.
-
Resetting the reminder
You can reset the reminder function to the default values by pressing
the “bell” symbol for 8 seconds. Depending on the model, the LED will
glow red or the display will indicate a countdown and the bar will
flash to show when the operation has been completed.
-
LED reminder
The status of the user of the desk is indicated by the LED in the bottom
left corner or by the light strip.
The status depends on the selected reminder interval. If the user
changes the position in an appropriate period in accordance with the
interval then the LED or light strip slowly flashes green. When the
sitting interval expires, the slow flashing green signal starts flashing
green quickly and then turns constant orange – this tells the user
that it is time to move the desk upwards and stand up.
When the desk is at standing height, the LED or light strip flashes
green until interrupted. When the desk is moved back down into sitting
position, the LED flashes green until the reminder function becomes
deactivated again.
After 4 hours without any action, the LED or light strip switches off.
When the handswitch is pressed, the green light comes on again.
Please note: If the reminder LED is activated then the handswitch is no
longer in standby mode as long as the light is on/active.