VS Sassoon VS7895A, Инструкция по эксплуатации

Страница: 15 / 20

CLEANING AND MAINTENANCE
To maintain optimum performance, the appliance should be cleaned
after each use:
1. Switch the trimmer off and remove the power supply, if
connected.
2. Detach the comb guide by gently lifting the front of the comb
guide from both sides and flipping it over to the back of the
unit, and locking it into position by clicking it securely onto the
fastener on the back of the handle (refer to ‘Using The Trimmer
Without The Comb Guide’ for further information).
3. Using the cleaning brush supplied, brush away any hair and
debris. Do not use a sharp object to clean the trimmer head.
4. To make cleaning even easier, the blades can be removed from
the trimmer and comb guide.
To remove the blades, hold the handle of the trimmer with one
hand, place your thumb underneath the blades and push the
blades up and away from the handle. Place the blades in a secure
place whilst cleaning.
Gently blow away any hair that is trapped beneath the blades.
The blades and the shaver head can also be rinsed under cool
running water. ONLY THE BLADES AND THE SHAVER HEAD CAN
BE RINSED UNDER THE TAP – THE TRIMMER SHOULD NEVER BE
PLACED UNDER THE TAP OR UNDER RUNNING WATER.
5. Ensure the blades are dry before re-attaching to the trimmer
body.
6. To replace the blades, ensure the stubble comb guide is detached
and then place the back of the blades back into the cavity on the
top of the trimmer. Press the blades down so that they click into
place.
7. When used regularly, the blades will not need to be oiled.
However, if the blades have been rinsed under the tap or the
trimmer has not been used for a prolonged period of time,
then it is advisable to apply a small amount of lubricating oil
(provided) onto the blades before using. This helps to keep the
blades as sharp as possible.