THE BEARD DESIGNER / TOOL TIPS
9
1. Before switching on, ensure that the 3D rotary cutting head is perfectly clipped
into place before use.
2. Press the
On/Off button once. The trimming cordless usage time are
shown on the LED display.
3. Select the desired trimming length setting using the + and – buttons.
4. Press the
button a second time. The motor now switches on and you can start
using The Beard Designer.
5. To switch off, hold down the
button for approximately 2 seconds. The cutting
length is now set for the next use. Press the
button twice to start The Beard
Designer again.
HEADS UP
The LED display screen switches off automatically after 60 seconds of disuse.
If you want to switch The Beard Designer to standby mode, press the
button once.
SMART MEMORY FUNCTION
• The Beard Designer automatically memories your last trimming setting used.
• When The Beard Designer is switched on, the integrated motorised chrome-
coated comb guide will automatically return to the last selected trimming
setting. Now that’s smart!
