THE BEARD DESIGNER / TOOL TIPS
13
PARK IT, TRAVEL
LOCK SYSTEM
The Beard Designer features a smart travel lock function that protects the 3D
cutting system and comb guide when not in use, and it prevents the trimmer from
being switched on and the buttons being activated accidently.
1. To activate the locking function, press and hold down the parking button for
a few seconds until the lock symbol flashes. The locking function is now
activated.
2. Following this, The Beard Designer will now move through its lock system,
which may take up to 10 seconds:
a. The Park It symbol
lights up in the LED display
b. The comb guide will rise progressively
c. The Beard Designer 3D head is unclipped and now descends, bringing the
comb guide with it.
d. The lock symbol flashes and the LED display screen will switch off.
e. To deactivate the locking function, press and hold down the parking
button until the LED screen shows a 3 to 1 countdown. The lock symbol
then flashes and the trimming length and remaining cordless use time
are now displayed.
