VS Sassoon BEARDED PRO, Советы по использованию инструментов

Страница: 11 / 20

THE BEARDED-PRO GROOMING GIFT SET / TOOL TIPS
11
TRIMMING TIPS
Hit up www.vsformen.com.au for more grooming tips & inspiration.
Before trimming your beard or stubble:
a. Use the
beard comb use prior to trimming to help prep hair by combing
through until tangle-free, then;
b. Use the beard brush to help untangle, soften and smooth. Using the beard
brush before trimming also helps to eliminate dead skin cells, while
revitalizing & rejuvenating skin to prep for trimming.
USING THE BEARD & STUBBLE TRIMMER
TRIMMING COMB GUIDE
1. Switch the trimmer on by sliding the On/Off switch upwards so that the
“I”marking is visible.
2. Select your desired cutting length. To adjust the cutting length
of your trimmer, simply turn the wheel up and down (clockwise
and anti-clockwise) to your desired cutting length setting. If
trimming longer than 6mm, it’s advised to move the short beard
guide to the back of the trimmer.
3. When trimming, hold the comb guide flat against the skin. For the most
precise, consistent trim, the tips of the teeth and the little corners
protruding from the comb should always be in contact with the
skin. If not, the precision of the cut may change. (Fig. 2-3).
4. It is suggested to trim the hair in the direction of hair growth,
as trimming against the direction of growth could cause a rash
or irritation.
5. Pull the skin firmly with one hand during the trimming process
to ensure the closest trim possible.
6. Move the trimmer slowly and carefully, so as not to cut any hair you do not
intend to trim.
7. Trim, shape and define your facial hair as needed.
NOTE:
Be careful not to apply excess pressure to the blade, as this may
damage the blade and can result in injury to the skin during trimming.
Fig.2
Fig.3
1
2