VRL PAR-363, Руководство пользователя

Страница: 10 / 11

10
MAINTENANCE
1.TROUBLESHOOTING
Problem Probable cause(s) Suggested remedy
Fixtures does not work
No power source
Check if power source is on or
cord works well.
Fuse burnt
Cut off power source and change
the same type fuse. If fuse was
burnt on end, it may be the
problem of connection; Find
qualified professors to repair.
Reset normally, but console
abnormally or no response
False or incomplete
data connection
Check, repair or change the data
line. Ensure connection is well
and the first lamp’s single input is
connected with the controller
output.
False address setting
Check DMX address.
Problem of signal
connector of some
fixtures
Pull out the signal output and
input of one fixture. Then connect
both directly. If it works well, this
fixture is proved to be the failed
one. Handle the rest fixtures alike
to check which fixture has
problems. If any problem, please
connect the technician.