Cobalt Business Exchange, Cobalt Park Way, Wallsend, Newcastle upon Tyne, NE28 9NZ, UK
EX_AUTO_FOCUS
Extension Unit Control Number
0x0C
Get
Yes
Length
1
Set
Yes
Type
Unsigned Int
Max
1
Min
0
Default
0
Camera CMD
N/A
This will action a one touch auto focus sequence.
0 = normal, 1 = perform autofocus.
When the operation has finished the firmware will reset this control to 0, i.e.
a get operation will return 1 whilst the autofocus operation is happening and
0 when it has finished.
This is a one shot action.
EX_MANUAL_FOCUS
Extension Unit Control Number
0x0D
Get
Yes
Length
1
Set
Yes
Type
Unsigned Int
Max
See below
Min
See below
Default
0
Camera CMD
CM_MANUAL_FOCUS
Bits 7:6 sets the mode
00 = Move to infinity position
01 = Move towards the infinity position
10 = Move to Macro position
11 = Move towards macro position
Bits 5:0 set the step size for modes 1 and 3.
We will set this to either 1, 2 or 3 in the OneView Application.
