Electric Blanket
| 7
Operating Instructions
Before each use, always inspect the product to ensure there is no damage
to the Power Cord, the Control Panel and the Blanket.
WARNING:
1. The Blanket Connector and Control Connector are designed
to connect only one way. Align the inner prongs and then push
together until Connectors are fully inserted (Fig. 1).
2. Plug the product into a 120V AC electrical outlet.
NOTE:
If there is no power, make sure the AC electrical outlet is functional and the connection in
step 1 is secure. Discontinue use if failure continues.
3. Use the Control Panel to set the heat to desired level.
NOTE:
Heat levels are “85” (low), “85-110” and “110” (high).
4. Press the On/Off Button on the Control Panel. The display will illuminate and all icons will
display. As a default, “85°F” will display, indicating the Control is set at the lowest heat
level. “4h” will display, indicating the Control Panel is set at the 4 hours auto off.
WARNING:
Burns may occur even if you set the temperature at low level. Check your skin
under the Blanket frequently.
5. To change your desired heat level, press the “+” Button for a higher heat level or the “-”
Button for a lower heat level. You can set it within 3 seconds after turning on and “SET“ will
appear for about 3 seconds, and then display the real-time temperature of the pad.
Display Of Heat Level Settings:
as Level 6
as Level 3
NOTE:
If the Control Panel shuts off, make sure the Blanket and Control connectors are
securely connected and re-start the product by pressing the On/Off Button.
6. Place the Blanket on top of the body. If the Blanket does not heat evenly, make sure there
are no folded areas.
7. Turn the product off by pressing the On/Off Button. Unplug it when not in use.
Содержание VRM010679N
Страница 1: ...Electric Blanket 1 This Is A Manual You re Getting Warmer Electric Blanket...
Страница 2: ......
Страница 3: ......
Страница 12: ...Electric Blanket 12 vremi com...
