Setting up
You’ll need a Magic Leap ID. Magic Leap 1 requires a Magic Leap ID to
connect your device with services like the app store and Magic Leap
World. Before turning on Magic Leap 1, complete these steps:
1. Go to https://id.magicleap.com.
2. Enter your email address.
3. Type your First Name, Last Name, and Date of Birth.
Magic Leap will send a code to your email account. Open that account
and enter the code on the Magic Leap web page.
●
Complete your account, including Country to see regional apps in
Magic Leap World, and you're ready to go!
Getting Started
To get started with the Magic Leap 1 you will have to turn it on, below is
described how that works.
Power Up: Once you've connected the Lightwear, hold down the button on
the Lightpack for a 3-count. Next hold down the button on the Control for
a 3-count while holding it close to the lightpack.
Power Down: To turn off Magic Leap 1 from the Launcher, select the battery
icon and then select the power off icon. Control shuts down
automatically. To manually turn off Magic Leap 1, hold down the Lightpack
power button for 8 seconds, then hold down the Control trigger and home
button for 3 seconds.
Wifi:
When Magic Leap 1 starts, it provides an orientation to the core features
and helps you ensure a good fit., connect to the WiFI and logging into your
account.
●
To connect to Wifi during your first power up it will show you a list of
all available networks in your area. Simply point the controller and
pull the trigger or tap the touchpad on your preferred network.
●
A keyboard will show up for you to fill in the password with. After that
is done click confirm and it will connect to the chosen Wifi network.
Magic Leap Quick Start Guide
