VQ OrthoCare Orthostim 4, Руководство для пациента

Страница: 13 / 44

11
port the situation and receive a replacement set of electrodes.
Save the non-working electrodes for evaluation by VQ OrthoCare’s
Quality Assurance Department;
DO NOT THROW THEM AWAY!
Select
Protocol
1
PAIN
40:00
(S) Select
6. Turn the OrthoStim4 on by pressing the (ON/OFF) button. The serial
number and compliance time will be displayed. After releasing the
(ON/OFF) button, the OrthoStim4 will start its self-test. When the
self-test is completed, you will see
Select Protocol at the top of the
screen and a number 1 fl ashing in the middle of the screen, along
with the length and purpose of treatment (e.g., pain; spasm).
4. Gently remove the electrodes from the plastic liner. Place the electrodes
on the sites prescribed by your physician or therapist and press them
fi rmly onto the skin.
Electrodes should be placed at least one inch apart
from each other.
5. Insert the lead wire into the
OrthoStim4. For instructions,
see page 8.