3
You now have the Main Chassis sitting on the 4 feet. This is a good time to
make sure that the table is positioned correctly. If it must be moved slightly or
centered on its stand, do it slowly.
Lift the clear acrylic platter (or optional super platter) and remove the tape on
the bottom, do not remove the grease inside the bearing. Carefully lower the
platter down onto the spindle. Spin the platter and check that it is spinning
freely and that there is no wobble.
It is very important that TNT- 6 is level. Place a 12" long bubble level across
the platter and level the turntable in two directions, left to right and front to
back. Rotating the black cone shaped feet on the bottom of the four legs will
level the unit. You must hold the black knurled ring below the stainless steel
when doing this.
Now place the MA in position. The MA is heavy and should be moved slowly.
Place the flywheel on the shaft and make sure it spins freely. Put one black belt
between each motor and the flywheel and the two large belts between the
flywheel and platter.
NEVER TURN THE MOTOR ASSEMBLY OVER, THE FLYWHEEL CAN
FALL OUT AND INJURE YOU OR BECOME DAMAGED.
Remove the SDS power supply from box C and place it where it will be
located. Plug the SDS into a wall outlet and plug the TNT-6 MA into the SDS.
Follow the directions that came with the SDS.
There is very little maintenance associated with the TNT-6.
The bottle of light
oil is used to occasionally lubricate the motors. If the motors ever make noise,
it is time to re-lube it.
There is a break-in period of at least 30 hours before the TNT-6 will sound its
best. For best possible sound try to turn on the turntable at least one hour
before you do serious listening. This will loosen up the belts, and warm up the
lubricant in the bearings.
When playing records remember that the record goes on the platter first, then
the center weight, and then the ring clamp. The ring clamp has to be lowered
parallel to the record and it will slide onto the rim of the platter. This will
clamp the record down like a vacuum system.
