2
HOW TO SET UP YOUR TNT-6
The most important thing you can do for your new TNT-6 is to place it on
a level surface. It cannot be stressed enough that a level base for the TNT-
6 will make set up much easier.
It is best to place the TNT-6 on a level surface that measures at least 27 x
2l inches. This will allow room for the optional dust cover if you should
want to purchase it.
Open the box labeled PART B. Remove the foam or cardboard and you will
find the Motor Assembly (MA), loose flywheel, turntable platter, and periphery
ring clamp. Carefully remove and place them in a safe location. Do not
remove the tape from the bottom of the flywheel and do not remove the grease
inside. If you bought the super platter it will be in box PART D.
Leveling ring
In the box labeled PART A, you will find the main TNT-6 with the four feet
and tonearm board mounted. Place the feet spaced 22” apart center to center
left to right and 16” center-to-center front to back.
