SET SCREW
There is very little maintenance associated with the HR-X. Every 3 months put
a drop of bearing oil (supplied) on your finger and touch the belts while they
are running. Use very little oil. Do not put oil on the flywheel to platter belt.
The bottle of light oil is used to occasionally lubricate the motors and flywheel.
If either unit ever makes noise, it is time to re-lube it.
There is a break-in period of at least 30 hours before the HR-X will sound the
best. For best possible sound try to turn on the turntable at least 20 minutes
before you do serious listening. This will loosen up the belts, and warm up the
lubricant in the bearings.
IF THE VTA KNOB SHOULD EVER LOOSEN UP, BACK OFF THE SET
SCREW SHOWN, PUSH DOWN ON THE KNOB AND RETIGHTEN THE
SET SCREW.
