ICON 960 USER MANUAL
VPC
07/15/21
For more information visit vpc.com
KEYING PIN KIT ASSEMBLY
PART # 310 113 461
TOOLS REQUIRED
Flat Head Screwdriver
Phillips Head Screwdriver
ASSEMBLY INSTRUCTIONS
1. Align the keying pin to the desired location. Place the
keying pin in the hexagonal opening in the iCon 960
receiver.
2. Secure the keying pin with the 2-56 Phillips head screws.
3. Remove the iCon 960 ITA cover.
4. Place the other keying pin in the corresponding location
in the ITA.
5. Replace the ITA cover.
NOTE:
In order to mate the connector, the
keying pin must be in the same alphabetical
positions in both the receiver and ITA.
Figure A.
The iSeries keying kit includes two pins and two screws
which provide six different keying options. The iCon960
system is designed to accept two kits which increase
the keying options to 36.
13